nagerma.blogg.se - Mbox 2 pro recording blinking orange light

MBOX 2 PRO RECORDING BLINKING ORANGE LIGHT MANUAL
MBOX 2 PRO RECORDING BLINKING ORANGE LIGHT CODE

Insta360 GO 2 Insta360 ONE X2 Insta360 ONE R Insta360 GO Insta360 EVO Insta360 ONE X Insta360 ONE Insta360 Nano S Insta360 Nano Insta360 Air Downloads. Blinking blue: Updating firmware: Blue (Light goes out twice in the process) Consumer. Plug the printer back in and turn the printer back on after it has been unplugged for a while. Recording: Blinking green (With Micro SD card) Blinking blue (Without Micro SD card). Table 2: Light flashes alternately between green and orange Flashesĭisconnect the printer cable from the printer, and then turn the printer off and unplug the printer from the power supply.

MBOX 2 PRO RECORDING BLINKING ORANGE LIGHT MANUAL

If the problem continues after you align the print head again, tap RESUME/CANCEL to resolve the error, and then perform manual print head alignment. The reverse side won't be printed when an error occurs.Īlign the printer so the paper output slot won't be exposed directly to a strong light source.

Tap RESUME/CANCEL to discharge the paper, and restart print from the front side of the next paper. The size of paper may not be compatible with automatic duplex printing. Use a digital camera or digital video camcorder that is compatible with this printer. If the error is still unresolved, the digital camera or digital video camcorder may not be supported by the printer.

Tap RESUME/CANCEL and reconnect the cable. The digital camera or digital video camcorder connected is not compatible with this printer. Tap RESUME/CANCEL to cancel the error so you can continue to print.Ī specified period of time has elapsed without a response from the digital camera or digital video camcorder. The printer has a built-in waste ink absorber for the ink used when the print head is cleaned.

Close the inner cover, then tap RESUME/CANCEL to start printing.

If this error still remains, the print head may be damaged. If the print head is already installed, remove it and check the electrical contacts for foreign matter, then reinstall.Īfter you reinstall the print head, you may need to realign it. It may damage the printer if you continue printing with an empty ink tank. Replace it with a new ink tank immediately after the printing. Tap RESUME/CANCEL continue printing with an empty ink tank. If the paper output tray is closed, open it. If paper is jammed, remove the jammed paper, reload paper in the printer, and then tap RESUME/CANCEL.

Reload paper in the sheet feeder or cassette and tap RESUME/CANCEL.

Table 1: Light flashes repeatedly orange Flashes Repeatedly orange: If so, count the number of flashes and refer to Table 1 below.Īlternately between green and orange: If so, count the number of flashes and refer to the Table 2 below. The light(s) on your printer panel may flash as follows:

MBOX 2 PRO RECORDING BLINKING ORANGE LIGHT CODE

Depending on the error, a support code error number and message may also display on your computer screen. When an error occurs you will see flashing lights on your printer panel.